首页
网站开发
桌面应用
管理软件
微信开发
App开发
嵌入式软件
工具软件
数据采集与分析
其他
首页
>
> 详细
COMP282代做、代写C++程序语言
项目预算:
开发周期:
发布时间:
要求地区:
COMP282 – The C++ Programming Language
University of Liverpool
Department of Computer Science
Assignment CA1 : C++ Console Application
1 Deadline
Monday 29th of April at 17:00
Feedback will be released on Monday the 20th of May (3 wks later).
2 Weighting
50%
3 Overview
You will create a small interactive console-based (i.e. text based) adventure game. The
project consists of 9 tasks. You are expected to use Visual Studio 2022 Community
Edition to build your game. You should complete the tasks in order, as some tasks
assume that previous tasks have been done. Each task builds upon the previous one.
Do as much as you can and then package your project for submission. Your solution
should demonstrate your knowledge of C++. Work alone: You must work alone on the
assignment. Plagiarism checks will be run. If you notice any typos or mistakes in the
assignment that I may have missed, or if you feel something is unclear, please contact me
(andyrox@liverpool.ac.uk) or post a question in the Canvas COMP282 Discussion page
(there is a specific discussion relating to clarification of the assignments).
4 Submission Requirements
I will upload a separate document to Canvas describing submission requirements but it is
likely that you will upload your cpp and h files to Codegrade. I will also upload a rubric
describing the mark scheme. Marking will be a combination of running automatic tests
and manually reviewing the code.
4.1 Overview: Fantasy Quest Adventure Game
The assignment is to create a basic command-line game using C++ and organise game
structure using OOP methods.
The game has a fantasy theme, in a style similar to Dungeons and Dragons, consisting
1
of a player that can navigate a series of connected locations (using commands North,
South, East, West or N,S,E,W). The player can collect items and engage in combat with
monsters. The player’s score in the game increases when they defeat a monster. The
objective of the game is to achieve a high score (by defeating monsters) and to defeat
the ’end of level boss’. There should be some introductory text at the start of the game
to set the scene, and the player can leave the game at any point by typing quit. The
player can type inventory or inv to see a list of all the items they hold. The player can
type fight to engage in combat with a monster, or type collect to collect all items in
the current room.
You must use the specified class, method and variable names to ensure your code can
be tested. You will get marks for using STL containers and iterators to store and manipulate the various objects in the game. You are free to add further methods/ variables/
functions as you wish. Be sure to add comments your code, briefly explaining the purpose
and functionality of classes, methods, and significant blocks of code. Also remember to
implement error handling. In the descriptions of programming elements below, I have
deliberately not specified function parameters and return types - this is for you to specify.
Similarly I have not specified where pointer use would be appropriate.
I have specified most of the monsters/locations/objects - this is so that the gameplay can
be tested.
The assignment is organised into tasks.
4.2 Task 1 - create game classes
The following classes should be written:
• Character The Character class defines characters in the game. It should have the
following methods: setName, getName which will get or set the name of the
character, and getHitPoints and setHitPoints, which get or set the hitpoints, or
‘health rating’ of the character.
• Monster Monster should be derived from Character.
• Player Player should be derived from Character. It should have a member variable
score (an integer that keeps track of the player’s score in the game), which is set and
read using setScore and getScore, and three containers weapons, potions and
treasures which hold the player’s items. It should also have the private member
variable currentLocation which represents the player’s current location. This can
be set using setCurrentLocation and read using getCurrentLocation.
• Item Item should have the following methods: getName, setName, which will
set or get the name of the item.
• Potion Potion should be derived from Item. It should have a member variable
strength (integer), which should be accessible via getStrength and setStrength.
• Weapon Weapon should be derived from Item. It should have a member variable
power (integer), which should be accessible via getPower and setPower.
2
• Treasure Treasure should be derived from Item. It should have a member variable
value (integer), which should be accessible via getValue and setValue.
• Location A Location object represents a place within the game. It should hold
data including name and description (accessible via member functions setName,
getName, setDescription, getDescription). It should be possible for the programmer to populate a location object with other game entities, using the following
member functions: addExit (creates an exit, either N, S, E or W, leading to another location object), addMonster (puts a specific monster at this location),
delMonster (deletes monster), getExits (displays a list of exits to the player),
addItem (places a specific item at this location). Function overloading should
be used on the addItem method so that addItem handles adding potions, treasures or weapons to the location. Member variables should include the containers
weapons, potions and treasures which hold the player’s items. And exits, which
holds the exits leading to other location objects.
4.2.1 File Structure
The File Structure should be according to good C++ practice, with declarations in the .h
files and implementations in the .cpp files. However for simple one or two line functions,
those implementations can be kept in the .h file, allowing the compiler to inline them and
reduce function call overhead. For this assignment we will also keep derived classes in the
same files as their parent classes. AdventureGame.cpp should have the main() function.
Files are:
• Character.cpp
• Character.h
• Item.cpp
• Item.h
• Location.cpp
• Location.h
• AdventureGame.cpp
4.3 Task 2 - Build the game world
Build the game by creating location objects and linking them together using the objects’
exits member variable. Create 12 location objects that are linked to each other according
to the map shown.
Here are the location names:
cave, temple, dungeon, castle, clearing, hall, garden, library, forest, house, ruins, field.
3
Set each location object’s description (you can put whatever you want here) and a name
to be displayed after “you are” - e.g. ‘ruins’ might be given the name ‘in some ruins’.
After building the game, set the player’s current location to the clearing - that will be
the start location of the game.
Create a game loop in the main() function. At this stage the game loop should simply
get a command from the player, and then describe the location again. If the user types
quit, the game should display the user’s score (which at this stage will be 0), and end.
4.4 Task 3 - Room Navigation
Modify the game loop so that it now tells the user where they are, and what exits are
available (N, S, E or W).
If the user types a direction (N, S, E or W, or North, South, East or West, or n,s,e
or w), the game should work out if an exit exists in that direction, and if it does, the
current location should change to that location.
If an exit does not exist, the game should tell the user this, and remain at the current
location.
By the end of this task the user should be able to navigate around the game, and quit
the game if necessary.
4.5 Task 4 - Adding Items
Create some items (see below).
Treasures: bag of coins, treasure chest, emerald, ruby, sapphire, diamond, gold ring.
Potions: Blue Healing Potion, Purple Healing Potion, Red Healing Potion.
Weapons: dagger, sword, crossbow, club, stick.
Use addItem to add these items (weapons, potions, treasures) to the locations in the
game as follows:
4
Change the game loop so that it announces what items are in the location, if any.
This information should be obtainable from the player’s current location.
If the user types collect, all of the items in the location should be collected by the
user. If the user types inv or inventory they should see a list of all their items, in the
three groups (Potions, Treasures, Weapons). Sort the lists alphabetically. If the user
types drink, all the healing potions in the user’s inventory should be deleted, and their
‘strength’ points should be added to the player’s HitPoints.
By the end of this task the user should be able to collect all items from rooms, drink the
healing potions, and list the items in the inventory.
4.6 Task 5 - Adding Monsters
Use addMonster to add monsters to the rooms.
Here are the monster names:
vampire, zombie, dragon, goblin, spectre, banshee, ghoul, orc.
Arrange the monsters in the game as follows, with the following hitpoint values:
Change the game loop so that it announces the presence of a monster in a room.
Note that the house has two monsters.
By the end of this task there should be monsters in locations.
5
4.7 Task 6 - Combat
By the end of this task it should be possible to engage in combat with the monsters/enemies
according to the rules of combat, by typing fight.
Create a function called rollDice which will return a random integer from 1-6.
Create a member function of the Player class, called combat, that will conduct combat
with between the player and any enemies in the current location. The rules of combat
are as follows:
1. Both Monster and Player have a hitpoint value. Once a character’s hitpoint value
reaches 0, that character is defeated.
2. The Monster strikes first.
3. Their damage to the player is determined by calling rollDice and multiplying the
result by 2. (So result can be 0-12).
4. The player’s hitpoint total is reduced by the damage inflicted by the Monster.
5. The player then strikes back - rollDice is called, and this is modified by the weapon
with the highest power rating. So if the player has a sword with a power of 10, 10
is added to the dice roll to determine damage done to the monster.
6. This cycle continues until either the player or the enemy reaches 0 hitpoints.
7. After each round, the hitpoints of each combatant are displayed to the user.
8. If there is more than one monster in the room, only one monster is engaged in
battle when the user types fight - the user needs to type it again to fight the
other monster. The monster order should be strongest first - so the player fights
the monster with the higher hitpoints first.
9. The Character class should have the member function takeHit added to it, which
will decrease the character’s hitpoints by the given amount.
10. If the player is defeated, the player’s score is shown and the game ends.
4.8 Task 7 - The Boss
Create a new Player character called ‘boss’, give it a name and description, and add the
boss to the game. Put the boss in the cave. Modify the game loop so that when the
boss is defeated, the game ends.
4.9 Task 8 - Game Enhancements
Add further items to the game:
Treasures: Cup, Pearl, Key, Book
Potions: Green Healing Potion
You can decide their value, and strength in the case of the healing potion.
Put these items into the possession of some of the monsters. Make sure that the ghoul
6
has the key.
Modify the game so that when a monster is defeated, their items become available in the
room for the player to collect.
4.10 Task 9 - Implementing Armour
Create a new child class of Item called Armour.
Add at least 5 examples of armour into the game. Some examples:
ringmail, chainmail, shield, breastplate, helmet, gauntlet.
As well as name and description, the Armour class should have a member variable called
protection. You can decide values for this. But make sure that you put the gauntlet, with a protection of 2, in the library. Armour reduces the effect of damage
inflicted on the character. All Character objects should have the ability to use armour, so
it should be implemented at the Character (parent class) level. All armour items should
be listed to the user when they type inv or inventory. Modify the combat rules so
that during combat, damage inflicted on the player by an enemy is reduced by a random
amount between 0 and the total value of protection of all the armour in the player’s
possession.
7
5 Example Gameplay
8
9
软件开发、广告设计客服
QQ:99515681
邮箱:99515681@qq.com
工作时间:8:00-23:00
微信:codinghelp
热点项目
更多
cis432代做、代写python/java程...
2024-05-04
eeen3007j代写、c++程序设计代...
2024-05-04
代写data程序、代做c/c++, jav...
2024-05-04
comp2006代做、代写c++程序语言
2024-05-04
comp26020代做、java/c++设计编...
2024-05-04
csci251 advanced programming...
2024-05-03
cs 6290: high-performance co...
2024-05-03
assignment 2: executing and ...
2024-05-03
ecse427/comp310 programmin...
2024-05-03
cs 452 (fall 22): operating...
2024-05-03
comp9414 23t2 assignment 2 ...
2024-05-03
dpst1091 23t1 assignment 2 ...
2024-05-03
program代做、代写python设计编...
2024-05-03
热点标签
finm8007
comp2006
comp26020
comp1721
eeen3007j
cis432
csci251
comp5125m
com398sust
32022
mth6158
comp328
finn41615
2024
mec302
mgmt3004
mgt7158
com160
as.640.440
econ3016
finm7405
econ7021
fin600
infs4205/7205
mktg2510-
f27sb
csse2310/csse7231
rv32i
eecs 113
comp1117b
cs 412
comp 315
econ7300
comp2017
ecs 116
fit5046
com6511
comp30024
acs341
econ1020
isys3014
acc408
comp1047
csc 256
cs 6347
finm7008
comp34212
csmde21
estr2520
comp285/comp220
mds5130/iba6205
finc6010
is3s665
busi2194
125.785
iom209
msin0041
econ339
cmt218
mast10007
comp5349
ecx2953/ecx5953
bios706
comp3310
mth6150
comp30027
comp20005
eec286
busi2211
bff2401
fnce90046
visu2001
mang6554
finc6001
125785
data423-24s1
engi 1331
fint2100
(520|600).666
can202
cs 61b
mast20029
info20003
stat512
econ3208
cmpsc311
engg1340
ecmt1010
fit5216
basc0003
ee3121
acct2002
comp5313
busi2131
ise529
elec372/472
csit940/csit440
cenv6141
comp3027/comp3927
ftec5580
comp1433
msci223
mark203
en3098
eden1000
ece6483
econ4410
mats16302
cs 6476
com6521
comp222
comp3211
comp10002
csc1002
chc6186
cs 161
comp27112
comp282
swen20003
comm1190
elec9764
acfi3308
acct7101
fin6035
comp2048
geog0163
comp2013
coen 146
dts101tc
sehh2042
comp30023
comp4880/8880
cs 455
07
stat0045.
fil-30023
celen085
psyc40005
math40082
are271
comp9311
ee5311
imse2113
comp 2322
acct2102
fnd109
int102
is3s664
is6153
data4000
accfin5034
fit5212
cs536-s24
fit5225
ecos3006
mes202tc
finc5001
stat3061
csc171
cs1b
7ssmm712
bu.450.760
cs170
comp3411
swen90004
cpt206
comp5313/comp4313—large
bl5611
kxo206
comp532
elec207
kxo151
cs 2820
cpt108
math2319
dts204tc
qm222
comp2511
ccs599
infs1001
mat2355
eeee4123
25721
ifn647
pols0010
hpm 573
qbus6860
comp9417
csci 1100
stat0023
cse340
comp2003j
cs 2550
cs360
fin 3080
ierg 4080
cs6238
cit 594
finm7406
hw6
联系我们
- QQ: 9951568
© 2021
www.rj363.com
软件定制开发网!